Click to Enlarge PRC FLOW HOME Products ASME Venturis ASME Flow Nozzles ASME PTC-6 Test Sections Orifice Plates Meter Run Sections Honed Flow Tubes Low Loss Flow Tubes Choked Flow Venturis The Following PRC Products are all to Industry Standards: ISA 1932 Flow Nozzles Nozzle Venturi Tubes Orifice Unions Tri-Clamp Venturis Straightening Vanes		Orifice Plate Meter Runs Orifice Plate Meter Runs sized per customer request and fabricated in accordance with ASME-3M-1989 or AGA Report No. 3 Sizes: 1/2" through 36" Materials per customer specifications. Click for Quote or more information Orifice Plates Square or sharp edged orifice plates sized per customer requirements. Available styles are paddle or universal type with concentric, eccentric or segmental orifices. Line sizes: 1/2" through 36" Material: Per customer specifications   All PRC Flow Measurement products are designed and manufactured per the applicable standard and or specification. Fabrication Codes ASME B&PV Code, Section VIII, Div. 1 ASME B31.1 - Power Piping ASME B31.3 - Process Piping Design Standards ASME MFC-3M, 1989 ASME PTC 6.1 ASME PTC 19.5 ISO-5167-1 AGA RPT 3 Sizing calculations and preliminary drawings available upon request at no charge.   Copyright ©2002-2006 PRC Flow Measurement & Control, Inc. All Right Reserved